Other boxes have soldered leads. The SMOK QBOX has two female pin connectors and one power connector. I have two questions on this. My first question is, were the pins soldered or are they the standard female atomizer pins and need to be inserted? The second question is: are the pins located at the blue side at the bottom of the box or the top?
I would recommend the SMOK QBOX if you want an automatic battery charge and a box-able mod. It has more power than the SMOK Baby Beast, and has more power than the other starter box. It needs a 510 connection, although you can also put a bubba plug on it. It is small, compact and has an intuitive interface.
I like the QBOX vape mod as I have a full sized mod and the QBOX makes me feel more satisfied while still using my full sized mod so there's not a sense of slight feel-bad-because-youre-using-a-half-sized-mod moments.
the package also comes with a small fireproof storage box with a magnet, which looks a lot like the QBOX device, an instruction manual, a white SMOK Baby Beast tank, a spare mouthpiece, an extra set of o-rings, and a USB charger. The box also has a hole in the bottom of the box for the tank. Once we have the package, we can start to test everything out!
Next you can see the top chamber of the box, this is the one with the two stainless steel posts, and the bottom chamber that holds the tank. You will later see that the last two ingredients are connected in the package, but to start, all you have to do is separate the tank and connect it to in the top chamber so you can install it. We will start with the bottles or tank. d2c66b5586